Product Name: Bubble Free Slideable High Gloss Corn Yellow Car Wrap Film
Product Description:
Car wrap film is a series of vinyl decals that are placed over the
body panels of the vehicle, letting you drastically change its
appearance. The design options include a standard glossy color,
gradient color, matte finish, chrome metallic color, and full-on
graphics treatments
Product Specfications:
| 1. Face Film | Type: | Polymeric Calendered Vinyl Film | Thickness: | 120 µm |
| Surface Finish: | Ultra Gloss | Color: | Peach Pink |
| 2. Adhesive | Type: | Clear Removable Acrylic Adhesive |
| Thickness: | 30 µm | Color: | Clear |
| 3. Liner | Type: | Air-Egress PE-coated Paper Liner | Thickness: | 140gsm |
| 4. Max Durability | Up to 5 years |
| 5. Product Size | Width | Length |
| (metric/m) | (Imperial/inch) | (Metric/m) | (Imperial/yard) |
| 1.27 | 50 | 18 | 20 |
| 1.52 | 60 | 23 | 25 |
Notice: There is a Minimum Order Requirement for Special Product
Size.
|
Product Application:
￭ Emergency Vehicles
￭ Cars & Vans
￭ Vehicle advertising
Advantages of Applying Car Wrap Film:
- Vinyl car wraps wear as well as, or better than paint – when
properly cared for. Think of it like a skin for your laptop or a
silicon cover for your phone. The vinyl can take a beating
protecting the vehicle’s paint underneath.
- Adds to the resell value of your car. When you remove it, your
paint is in the same condition as on the day it was wrapped. Thus
adding to the resale value by having flawless paint on your car. A
repainted car normally decreases the value of your vehicle due to
concerns over possible previous accident(s).
- Expensive, color-matching paint fees are unnecessary for scratches
or accident vehicles; just re-wrap the section that needs repair.
- Many of the styles can not be reproduced by paint.
- Matte-paint jobs can be brittle and chip easily, while vinyl is
more durable and harder to scratch. In the event that repairs are
needed, the part that was damaged can be easily replaced, providing
a perfect match.
- Vinyl car wraps come in many colors and can have matte, semi-gloss,
gloss, brushed steel, carbon fiber, matte metallic, chrome, and
even leather-like finishes.
Product Features:
- Unique patented adhesive technology
- Outstanding durability and outdoor performance
- Excellent conformability around curves and recesses
- Very high gloss semi-conformable film
- UV, temperature, humidity, and salt-spray resistance
FAQs:
- How to remove vinyl from your car?
1. Use your fingernail or plastic scraper to pull the wrap from the
edges of the entire panel. It’s going to look gnarly, but it’ll all
be gone in a few minutes.
2. Use the heat gun to evenly heat the surface of the wrap to about
120 °F (50 °C). This will loosen the adhesive so you can pull it
off. Use a non-contact infrared thermometer to confirm you aren’t
overheating, which can lead to excessive adhesive residue left on
the surface.
3. Pull the wrap away from the edges at a steep angle, pulling the
wrap back on itself at 15 to 20 degrees. When the wrap gets hard to
pull, reheat and start pulling again.
4. Finally, use Turtle Wax Label & Sticker Remover or Bug & Tar
Remover to remove any adhesive residue from the surface of the
panel.
- How Do You Maintain a Wrapped Car?
The best way to ensure a wrap will last is to keep the car in a
garage. If you don't have a garage, invest in a good car cover. You
should handwash the car with soft microfiber towels. Automatic car
washes are off-limits: The harsh brushes could scratch or lift off
the wrap.
- How long does vinyl wrap last?
Depending on the quality of the wrap, type of vinyl wrap, care
taken during installing, care for installation, and environmental
factors, car wraps can last from three to ten years.
