Sign In | Join Free | My himfr.com |
|
Ask Lasest Price | |
Brand Name : | ShengHui |
Model Number : | SHGDCW-41 |
Certification : | SGS |
Price : | USD 250/ Roll |
Supply Ability : | 200,00 Rolls/Month |
Delivery Time : | 5-7 days |
Product Name: 1.27m Slidable Laser Blue Glitter Vinyl Wrap Air Release high
gloss car wrap
Air Release Slideable Laser Blue Glitter Car Wrap Film Slidable
Laser
Product Description:
Product Features:
Product Specfications:
1. Face Film | Type: | Polymeric Calendered Vinyl Film | Thickness: | 120 µm |
Surface Finish: | Glitter & Diamond | Color: | Silver | |
2. Adhesive | Type: | Clear Removable Acrylic Adhesive | ||
Thickness: | 30 µm | Color: | Clear | |
3. Liner | Type: | Air-Egress PE-coated Paper Liner | Thickness: | 140gsm |
4. Max Durability | Up to 5 years | |||
5. Product Size | Width | Length | ||
(metric/m) | (Imperial/inch) | (Metric/m) | (Imperial/yard) | |
1.27 | 50 | 18 | 20 | |
1.52 | 60 | 23 | 25 | |
Notice: There is a Minimum Order Requirement for Special Product Size. |
1. Use the heat gun to evenly heat the surface of the wrap to about
120 °F (50 °C). This will loosen the adhesive so you can pull it
off. Use a non-contact infrared thermometer to confirm you aren’t
overheating, which can lead to excessive adhesive residue left on
the surface
2..Finally, use Turtle Wax Label & Sticker Remover or Bug & Tar
Remover to remove any adhesive residue from the surface of the
panel.
3. Pull the wrap away from the edges at a steep angle, pulling the
wrap back on itself at 15 to 20 degrees. When the wrap gets hard to
pull, reheat and start pulling again.
4. Use your fingernail or plastic scraper to pull the wrap from the
edges of the entire panel. It’s going to look gnarly, but it’ll all
be gone in a few minutes.
Product Application:
FAQs:
1. How Do You Maintain a Wrapped Car?
The best way to ensure a wrap will last is to keep the car in a garage. If you don't have a garage, invest in a good car cover. You should handwash the car with soft microfiber towels. Automatic car washes are off-limits: The harsh brushes could scratch or lift off the wrap.
2. Can I put my wrapped car through a car wash?
Hand washing is best for vinyl wraps, but brushless or touchless car washes can be just as safe. You can even use a pressure washer if you’re gentle.
3. Will car wrap damage my car’s paint?
Actually, car wrap can protect your paint because it blocks damaging ultraviolet light. When you remove it, the original finish will be intact.
Advantages of Applying Car Wrap Film:
![]() |