Product Name: Bubble Free Swipeable Matte Metallic Black Car Wrap Film
Product Description:
Car wrap film is a process of transforming the color and looks of
your car by applying large sheets of pressure-sensitive vinyl film
to each individual panel on the car. Carbon fiber vinyl wrap film
is applied with extreme precision and skill and can only be carried
out by highly trained and specialized staff.
Product Specfications:
| 1. Face Film | Type: | Polymeric Calendered Vinyl Film | Thickness: | 120 µm |
| Surface Finish: | Matte | Color: | Matte Metallic |
| 2. Adhesive | Type: | Clear Removable Acrylic Adhesive |
| Thickness: | 30 µm | Color: | Clear |
| 3. Liner | Type: | Air-Egress PE-coated Paper Liner | Thickness: | 140gsm |
| 4. Max Durability | Up to 5-7 years |
| 5. Product Size | Width | Length |
| (metric/m) | (Imperial/inch) | (Metric/m) | (Imperial/yard) |
| 1.27 | 50 | 18 | 20 |
| 1.52 | 60 | 23 | 25 |
Notice: There is a Minimum Order Requirement for Special Product
Size.
|
FAQs:
- Will car wrap damage my car’s paint?
Actually, car wrap can protect your paint because it blocks
damaging ultraviolet light. When you remove it, the original finish
will be intact.
- How to remove vinyl from your car?
1. Use the heat gun to evenly heat the surface of the wrap to about
120 °F (50 °C). This will loosen the adhesive so you can pull it
off. Use a non-contact infrared thermometer to confirm you aren’t
overheating, which can lead to excessive adhesive residue left on
the surface.
2.Finally, use Turtle Wax Label & Sticker Remover or Bug & Tar
Remover to remove any adhesive residue from the surface of the
panel.
3.Pull the wrap away from the edges at a steep angle, pulling the
wrap back on itself at 15 to 20 degrees. When the wrap gets hard to
pull, reheat and start pulling again.
- Can I put my wrapped car through a car wash?
Hand washing is best for vinyl wraps, but brushless or touchless
car washes can be just as safe. You can even use a pressure washer
if you’re gentle.
- How Do You Maintain a Wrapped Car?
The best way to ensure a wrap will last is to keep the car in a
garage. If you don't have a garage, invest in a good car cover. You
should handwash the car with soft microfiber towels. Automatic car
washes are off-limits: The harsh brushes could scratch or lift off
the wrap.
Product Application:
￭ Emergency Vehicles
￭ Buses
￭ Trailers
￭ Trucks
Product Features:
- Long term removability after the intended period of use
- Exceptional durability and performance
- Cost-efficient application
- Excellent conformability around curves and recesses
- Faster positioning and air bubble-free car wrapping film
application
- Even the most experienced applicators are more productive, compared
to the standard permanent adhesive.
- Available in opaque and textured, special effect, and metallic
options
Advantages of Applying Car Wrap Film:
- Many of the styles can not be reproduced by paint.
- Expensive, color-matching paint fees are unnecessary for scratches
or accident vehicles; just re-wrap the section that needs repair.
- You can restore the car to its original color by removing the wrap.
- Vinyl car wraps protect your OEM paint and are 100% removable.
- Hides scratch, small chips, and “freshens” the look of your
vehicle.
- Warranties and/or lease agreements remain valid. Painting can void
warranties and is not a lease option.
- Adds to the resell value of your car. When you remove it, your
paint is in the same condition as on the day it was wrapped. Thus
adding to the resale value by having flawless paint on your car. A
repainted car normally decreases the value of your vehicle due to
concerns over possible previous accident(s).
- It’s difficult to tell it’s not painted.
- You don’t have to wrap your entire car; you can just do your hood,
roof, mirrors, stripes, etc.
- Matte-paint jobs can be brittle and chip easily, while vinyl is
more durable and harder to scratch. In the event that repairs are
needed, the part that was damaged can be easily replaced, providing
a perfect match.
- Vinyl car wraps come in many colors and can have matte, semi-gloss,
gloss, brushed steel, carbon fiber, matte metallic, chrome, and
even leather-like finishes.
